Zircon U–Pb ages and Hf isotope compositions of migmatites from the North Qinling terrane and their geological implications     

Q. Liu  Y.‐B. Wu  H. Wang  S. Gao  Z.‐W. Qin  X.‐C. Liu  S.‐H. Yang  H.‐J. Gong 《Journal of Metamorphic Geology》2014,32(2):177-193

Migmatites are predominant in the North Qinling (NQ) orogen, but their formation ages are poorly constrained. This paper presents a combined study of cathodoluminescence imaging, U–Pb age, trace element and Hf isotopes of zircon in migmatites from the NQ unit. In the migmatites, most zircon grains occur as new, homogeneous crystals, while some are present as overgrowth rims around inherited cores. Morphological and trace element features suggest that the zircon crystals are metamorphic and formed during partial melting. The inherited cores have oscillatory zoning and yield U–Pb ages of c. 900 Ma, representing their protolith ages. The early Neoproterozoic protoliths probably formed in an active continental margin, being a response to the assembly of the supercontinent Rodinia. The migmatite zircon yields Hf model ages of 1911 ± 20 to 990 ± 22 Ma, indicating that the protoliths were derived from reworking of Palaeoproterozoic to Neoproterozoic crustal materials. The anatexis zircon yields formation ages ranging from 455 ± 5 to 420 ± 4 Ma, with a peak at c. 435 Ma. Combined with previous results, we suggest that the migmatization of the NQ terrane occurred at c. 455–400 Ma. The migmatization was c. 50 Ma later than the c. 490 Ma ultra‐high‐P (UHP) metamorphism, indicating that they occurred in two independent tectonic events. By contrast, the migmatization was coeval with the granulite facies metamorphism and the granitic magmatism in the NQ unit, which collectively argue for their formation due to the northward subduction of the Shangdan Ocean. UHP rocks were distributed mainly along the northern margin and occasionally in the inner part of the NQ unit, indicating that they were exhumed along the northern edge and detached from the basement by the subsequent migmatization process.  相似文献   

Modeling deepwater seabed steady-state thermal fields around buried pipeline including trenching and backfill effects     

《Computers and Geotechnics》2014

Deepwater pipelines are designed to transport mixtures of oil and gas, and their associated impurities at wellhead temperatures that can be in excess of 149 °C (∼300 °F or 422 K) while the external temperature maybe in the range of 5 °C (∼41 °F or 278 K). Depending on the circumstances these pipelines may be buried for physical protection or for additional thermal insulation using robotic trenching equipment. This results in a complex cut and backfill geometry in the seafloor in addition to altering the thermal properties of the backfill. A two-dimensional boundary element model was developed specifically to address to investigate the local steady-state thermal field in the near field of the pipeline. The model allows one to account for the complex geometries in the near field associated with this burial technique, site-specific multi-layered soil conditions and the seawater adjacent to the seafloor. A parametric study was preformed to evaluate effects of the thermal power loss, burial depth, pipe diameter and soil thermal conductivity on the thermal field in the near field of a buried pipeline. The numerical examples illustrate the influence of the backfill thermal property on the temperature at the pipe wall, that the pipe diameter controls the required output thermal power needed to maintain the desired pipe wall temperature, and the importance of pipeline burial depth on seabed temperature distribution above the pipeline.  相似文献   

Critical Top Tension for Static Equilibrium Configuration of A Steel Catenary Riser     

Chainarong ATHISAKUL  Karun KLAYCHAM  Somchai CHUCHEEPSAKUL 《中国海洋工程》2014,(6):829-842

This paper aims to present the critical top tension for static equilibrium configurations of a steel catenary riser（SCR） by using the finite element method. The critical top tension is the minimum top tension that can maintain the equilibrium of the SCR. If the top tension is smaller than the critical value, the equilibrium of the SCR does not exist. If the top tension is larger than the critical value, there are two possible equilibrium configurations. These two configurations exhibit the nonlinear large displacement. The configuration with the smaller displacement is stable, while the one with larger displacement is unstable. The numerical results show that the increases in the riser＇s vertical distances, horizontal offsets, riser＇s weights, internal flow velocities, and current velocities increase the critical top tensions of the SCR. In addition, the parametric studies are also performed in order to investigate the limit states for the analysis and design of the SCR.  相似文献   

浅析如何在溶剂萃取机理研究中正确使用斜率法          下载免费PDF全文

高丹丹  李东东 《盐湖研究》2019,27(3):27-34

斜率法是萃取机理研究最为常用的方法之一。尽管其理论基础和使用方法非常简单,但该方法却常常被误用,导致其非但不能有效的确定萃取机理,反而产生了误导性结论。本文以t-BAMBP萃取碱金属离子(K~+、Rb~+、Cs~+)体系为例讨论了常见的错误用法以及造成这类情况的根源问题,之后对其他萃取体系中类似错误用法进行了简要评述,表明斜率法的错误使用主要源于对萃取反应方程式的错误假定及对工作方程推导过程中引入的近似处理理解不当。最后总结了在萃取机理研究中正确使用斜率法的几点注意事项。  相似文献   

Concurrent Determination of U‐Pb Age and REE Mass Fractions of Zircon by High Mass Resolution SIMS     

Yu Liu  Qiu‐Li Li  Guo‐Qiang Tang  Xian‐Hua Li 《Geostandards and Geoanalytical Research》2020,44(3):421-437

A combined geochronological and geochemical investigation for the same domain of zircon provides valuable information on timing and genesis, particularly in the case of multi‐growth metamorphic zircon. A high spatial resolution concurrent analytical method for zircon U‐Pb age and rare earth element content was successfully achieved in this study, using a multi‐collector secondary ion mass spectrometer (SIMS) at a ~ 8 μm diameter scale. Special instrument parameters were employed, including a high mass resolution of approximately 15000 applied to replace the previous energy filter method, and a dynamic multi‐collector mode used to reduce the measurement time to 18 min per analysis. Six zircon reference materials yielded precise and accurate ²⁰⁶Pb/²³⁸U ages, which are comparable to those obtained by the ordinary mono‐collector method, but with 2–3 times higher spatial resolution. All zircon grains measured in this study showed enriched heavy‐REE (HREE) contents consistent with previously reported values determined by LA and solution ICP‐MS methods. The light‐REE (LREE) mass fractions measured using both SIMS and LA‐ICP‐MS methods in this study, although with quite different volume, show consistent results within uncertainties.  相似文献   

羌塘中部白措花岗岩岩石地球化学特征、锆石U Pb年龄和Hf同位素组成及其构造意义     

李学仁  万友利  王剑 《地质论评》2020,66(5):1172-1185

本文对羌塘中部白措花岗岩的研究表明，岩体是由花岗闪长岩和二长花岗岩同时侵位的复合岩基，锆石U Pb年龄分别为213. 8±1. 3 Ma、210. 0±1. 1 Ma和208. 1±1. 4 Ma。白措花岗岩为硅过饱和的准铝质—弱过铝质岩石，Eu负异常明显，富集大离子亲石元素，亏损高场强元素，显示典型的壳源特征。εHft)为负值，主要集中于-10～-15，对应的Hf同位素二阶段模式年龄峰值为1. 78 Ga，显示源区为古元古代古老地壳；同时，花岗岩中含有大量闪长质暗色包体，表明有壳幔岩浆混合作用，推测为同时期玄武质岩浆的底侵作用，在地壳深部诱发富硅质基底岩石重熔，快速喷发形成玄武岩—流纹岩双峰式组合，而花岗岩则是由玄武质岩浆在地壳充分熔融后，岩浆沿羌塘中部已有的构造破碎带侵入形成，并且在熔融过程中有镁铁质岩浆注入少量结晶的长英质岩浆中形成暗色包体。因此，花岗岩与双峰式火山岩是同一裂陷动力机制的产物。花岗岩的侵入预示了晚三叠世羌塘盆地构造岩浆活动的结束，之上开始了羌塘侏罗纪海相盆地的沉积。  相似文献   

西准噶尔白杨河铍铀矿床中铍与铀成生关系初探——来自围岩蚀变和矿石矿物接触关系的证据     

刘畅 《地质与勘探》2020,56(3):465-477

与高硅富氟火成岩(流纹岩或花岗斑岩)有关的铍矿床中常伴有铀矿化,其成矿特色明显,是认识岩浆-岩浆热液-热液演化过程中铍与铀地球化学行为异同的理想对象,但其中铍与铀成矿的时空关系及成因关系尚不清楚。为了理解该类矿床中铍与铀的成生关系,并为区域内铍与铀的找矿勘查提供理论支撑,本文选取该类矿床的典型代表—西准噶尔白杨河铍铀矿床为研究对象,通过镜下观察、扫描电镜能谱和激光拉曼光谱分析,对矿区内单铍矿石、单铀矿石和铍铀矿石开展了系统的岩相和矿相学研究。结果显示,与铍矿化相关的围岩蚀变为钠长石化、电气石化、白云母化、萤石化、碳酸盐化和绿泥石化,与铀矿化相关的围岩蚀变为硅化、赤铁矿化、萤石化、伊利石化和锰矿化(含少量铅),且铍铀矿石中可见沥青铀矿切穿羟硅铍石的现象。结合铍与铀的地球化学行为和前人研究成果,认为白杨河铍铀矿床中铍矿化与铀矿化应是不同期热液作用的结果:铍矿化可能是花岗斑岩深部岩浆房分异的岩浆热液在不断演化过程中形成的,而铀矿化可能与后期流体(如幔源流体、加热循环的大气降水等)的淋滤作用有关。  相似文献   

2017年四川九寨沟MS7.0地震及余震定位研究     

徐旭  徐锦承  张伟 《中国地震》2020,36(2):324-332

采用特定震源台站校正定位方法对九寨沟M_S7.0地震及其余震进行了精定位研究，结果显示九寨沟地震主震深度为19km左右，余震主要分布于5~15km深度范围；与单事件定位方法相比，其余震展布和断层的线性特征更吻合，更具有平面特征；与双差定位法相比，精定位事件覆盖范围更广。精定位结果显示，断层整体为虎牙断裂西北向的延伸，根据余震分布和特定震源区的校正项分布，认为此发震断层应分南、北两段；余震区长度为40km左右，西北段宽度为10km左右，东南段宽度为6.5km左右。  相似文献   

桥梁沉井基础抗震性能研究现状及展望          下载免费PDF全文

王义  陈兴冲  张熙胤  张永亮  刘正楠 《世界地震工程》2020,(1):044-55

随着国内外大跨桥梁特别是跨海桥梁建设的迅速发展，沉井基础在桥梁基础中所占的比例越来越大。虽然沉井基础作为1种刚性基础具有良好的力学性能，然而震害实践表明沉井基础在地震作用下也并非万无一失。通过分析国内外典型桥梁沉井基础的震害特征发现，沉井基础的地震破坏与桩基础有显著差异，且与埋置深度有直接关系；研究表明:地震作用下沉井基础的破坏机理及地基承载力与静力作用下明显不同，但目前在该方面的研究还较为欠缺；总结和对比了现有几种沉井基础-土相互作用研究方法，并分析了几种研究方法的优缺点和适用场合；同时也归纳和对比了各国抗震规范对桥梁沉井基础的基本规定、适用范围、计算方法和构造规定等方面的内容。最后结合现有的研究现状对沉井基础抗震性能研究的发展方向进行了展望，此外，随着我国跨海、跨江及跨库区大跨桥梁建设的发展，地震力和波浪力等多灾害因素共同作用下深水沉井基础桥梁破坏机理及设计方法的研究势在必行。  相似文献   

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests     

Hua-Xiang Zhu  Zhen-Yu Yin  Qiang Zhang 《国际地质力学数值与分析法杂志》2020,44(3):389-404

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.  相似文献